|Basic alloys:||1000 / 3000 / 5000 series (chemical composition A.A. standard)|
|Thickness:||between 0.80 and 3.00 mm|
|Width:||up to 1,550 mm|
|Length:||coils or sheets up to 6,000 mm|
|Coating:||polyester paint, thickness minimum 50 µm|
|Finishes:||glossy – semi glossy – matt – metallic – speckled (both sides on request)|
|Colours:||unlimited range (RAL colours and colours matched to sample provided)|
|Protective film:||LDPE protection provided by UV-resistant|
|Fire reaction:||low flame spread (RWTUV certification, class A1*)|
|Workability||very thick coating resistant to bending and deformation, no cracking at a bends radius from 1T to 2T (it depends on basic alloys used, physical state and aluminium thickness)|
|Impact resistance||no cracking at a maximum of 10 Nm|
|Off-cuts recycling||100% recycle|
|Flatness||total “Panel Quality” (continuous stretching)in accordance with the EN 485-4 norm|
|Appearance||completely evenness of finish and colour|
|* class A1 is the safest reaction class for building in Europe, in accordance with EN 13501-1 norm|
|– The company reserves the right to implement modifications to comply with new legislation and to keep up with developments in technology.
– When installing or working with these sheets, the arrows printed on the protective film must be lined up to ensure even colour and sheen.
– All pre-coated Otefal panels must be installed with the arrows printed on the protective film facing the same direction.
– The above instructions must also be given to installers and end users and must be closely observed before cutting, profiling or installing sheets.